Responsibility is quality assurance,quality is the life of the brand.
|Place of Origin:||Chongqing,China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Wooden case suitable for sea transportation and air transportation|
|Delivery Time:||10 days|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||500 sets/year|
|Flow Rate:||4000L/hour||Filtering Precision:||≤1 Micron|
|Water Content:||≤5ppm||Gas Content:||≤0.1%|
|Temperature Range:||20-80℃||Heated Surface:||≤1.0W/cm2|
|Working Pressure:||≤0.4 Mpa||Operation Mode:||Automatilc & Manual|
|Color:||Optional||Power Supply:||By Customized|
|Total Power:||42KW||Cleanness:||≤ Grade 6 (NAS)|
transformer oil filter machine,
transformer oil filtration equipment
Fully Automatic Transformer Oil Filtration Equipment / Insulating Oil Recycling 42KW
SVP series efficiency single stage vacuum transformers insulation oil purifier can quickly and effectively remove water, gas, oxide materials, fee carbon and other impurities from transformer oil to lower the PH value, improve breakdown voltage and quality.
This vacuum insulation oil filtration machine can live line work on the spot and also can be suitable to purify other insulating oils, such as capacitor oil, switch oil, mutual inductor oil, cable oil, circuit breaker oil and so on
SVP also can be serving as the vacuum oiling equipment and drying equipment, SVP vacuum transformer oil purifier adopts high vacuum oil dehydrator and degasification system and duplex-Stereofilm evaporating technology for drying insulation oil and recover the dielectric strength.
SVP series belongs new type efficiency vacuum oil purifier, use 3 dimensional stereo evaporation technology, and it is a technology combination of gauze filter and polymer adsorption. The efficiency is 5 to 8 times than the common oil purifier. do not need any consumable , the energy consumption is very low
Work principle of SVP transformer oil purifier:
Single stage insulation oil filter removes the impurities in oil by special filters with high efficiency and large
dust-holding capacity. Water separator and vacuum separator tank installed, with the lipophilicity
technology and "cavitation" principle, the oil contact area of in vacuum yank expanded to hundreds of time
than before, while "cavitation" system increase the surface area of oil evaporate, and evaporated constantly updated interface, maximized the oil trace in the vacuum system and water evaporation area, then making water in the oil under conditions of low heat, vacuum environment large surface, high rapid vaporization pumping speed discharged by the vacuum evaporation system.The discharged of water, gas, through cooling system gradual cooling and dehumidification,finally discharged from the vacuum system.Dried oil in vacuum pump after dewatered vaporization was promoted by positive pressure, after fine filtration, clean and pure oil transfer to the outlet port, the complete purifying process finish.
■ A multi-functional machine,an integrated process of dehydration, degassing,three groups
(coarse,medium,fine)filter,adsorption regeneration, or separately used for different purpose of vacuum
dehydration, degassing, filtering impurities and adsorption regeneration.
■ Safe and reliable. Pressure, temperature, liquid level data with clear instructions, automation control.
■ Horizontal vacuum separation technology, high efficient separation of vacuum degassing, exponentially increase evaporation area, increase the retention time of the oil keep in the vacuum chamber, high efficient and reliable.
■ Using high pressure oil pump, put oil in/out through machine stability, low noise, long work life.
■ Stainless steel mesh filters, acid resistant and anti-corrosion, large filtration area, strong suction sewage capacity, high working efficiency.
■ Radiant heating system, enhance the contact area of the oil and oil heater, reduce the surface temperature of the heater, put an end to oil cracking aging.
■ Fault protection, Heater protection, prevent heater dry, pressure protection, discharge fault alarm and motor alarm.
■ Vacuum pump front cooler, reduce the water into the vacuum pump,and reduce the frequency of replace the vacuum pump oil, extend the life of the vacuum pump.
■ Patent holder degassing tank "foam protection structure + two-way foam electronic monitoring system", to prevent vacuum pump oil injection.
■ Automatic oil floating ball and automatic oil level electronic control system, realize the man-machine separation
■ High efficient, low economic and operating costs.
■ Rational design structure. Convinent for mobile use or online.
|Vacuum level||-0.06～-0.095 Mpa|
|Working pressure||≤ 0.4 Mpa|
|Temperature range||20 ～ 80℃|
|Filtering precision||≤1 micron|
|Continuous work||≥200 hr|
|No failure running||≥5000 hr|
|Power supply||380V, 50HZ, 3PH ( or Customized )|
|Working noise||65 dB|
|Heating power (kw)||38|
|Total power (kw)||42|
Index Of Purified Oil:
|Breakdown voltage||≥ 65KV|
|Water content||≤ 5ppm|
|Gas content||≤ 0.1%|
|Filtering particles||≥ 99.5%|
|Particles size||≤ 1 micron|
|Cleanness||≤ Grade 6 (NAS)|
|Processing index by regeneration device as following (customer's preference)|
|Acid value||≤ 0.03 mgKOH/g|
|Water-solubility||≥ 5.4 PH|
|Flash point (close cup)||≥ 135°C|
|Dielectric- factor loss||tgδ (90℃)% ≤ 0.005|
Contact Person: Kevin